{"id":666,"date":"2024-12-30T18:54:22","date_gmt":"2024-12-30T18:54:22","guid":{"rendered":"https:\/\/foxlap.com\/tutorials\/?p=666"},"modified":"2026-03-25T15:13:00","modified_gmt":"2026-03-25T15:13:00","slug":"foxlap-dedicated-board","status":"publish","type":"post","link":"https:\/\/foxlap.com\/tutorials\/foxlap-dedicated-board\/","title":{"rendered":"FoxLAP &#8211; Dedicated board"},"content":{"rendered":"\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1198\" height=\"470\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1.jpg\" alt=\"\" class=\"wp-image-1272\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1.jpg 1198w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1-300x118.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1-1024x402.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1-768x301.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/foxlap-scaled-1-1-600x235.jpg 600w\" sizes=\"auto, (max-width: 1198px) 100vw, 1198px\" \/><\/figure>\n\n\n\n<p>The purpose of this post is to present the Pro version of the FoxLAP device, built on its dedicated board. This board has been developed and tested over the past two years, and has already been used in competition here in France by my son and other drivers. With two years of technical feedback, we can confirm that this PCB is both reliable and efficient.<\/p>\n\n\n\n<p>It features a larger 3.2-inch display, and the overlay with integrated buttons not only protects the screen but also gives the device a more refined look.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Experience what it\u2019s like to drive with a FoxLAP Lap Timer.<\/h3>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"training with FoxLAP lap timer. Biscarosse gokart track\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/5etYgwyPGMw?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">1. Dedicated Board version<\/mark><\/h3>\n\n\n\n<p>In this tutorial we will build a FoxLAP device based on the dedicated board and working with both the <a href=\"https:\/\/foxlap.com\/tutorials\/foxlap-external-sensors\/\">external sensor pack<\/a> and the sensors given with the dedicated board<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1.1 \u2013 Print the model<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1049\" height=\"634\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated.jpg\" alt=\"\" class=\"wp-image-975\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated.jpg 1049w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated-300x181.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated-1024x619.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated-768x464.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/model-dedicated-600x363.jpg 600w\" sizes=\"auto, (max-width: 1049px) 100vw, 1049px\" \/><\/figure>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>STL&nbsp;<\/strong>files were created using&nbsp;<strong><a href=\"https:\/\/www.blender.org\/download\/\">Blender<\/a><\/strong>.<\/li>\n\n\n\n<li><strong>3D Printer:<\/strong>&nbsp;<strong>Bambulab X1 Carbon<\/strong>.<\/li>\n\n\n\n<li><strong>Slicer<\/strong>: Bambu Studio<\/li>\n\n\n\n<li><strong>3D filament<\/strong>: <strong>1.75mm <\/strong><a href=\"https:\/\/eu.store.bambulab.com\/products\/petg-cf?srsltid=AfmBOooyDzYY6m6eUFZfJAXbdwB3dKh6mE9q3YgB0-ZYedBKoXGDvefy\">Bambu PETG-CF Black filament<\/a><\/li>\n\n\n\n<li><strong>Print settings:<\/strong>&nbsp;0.4mm nozzle, Standard quality (0.16mm), 40% infill, Support (zig zag support)<\/li>\n<\/ul>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1544\" height=\"820\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio.jpg\" alt=\"\" class=\"wp-image-1142\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio.jpg 1544w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio-300x159.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio-1024x544.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio-768x408.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio-1536x816.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/bambustudio-600x319.jpg 600w\" sizes=\"auto, (max-width: 1544px) 100vw, 1544px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-video\"><video height=\"720\" style=\"aspect-ratio: 1168 \/ 720;\" width=\"1168\" controls src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/video_2025-07-14_05-56-26.mp4\"><\/video><\/figure>\n<\/div>\n<\/div>\n\n\n\n<p>The zip contains both top an bottom part<\/p>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/foxlap.com\/dl\/Foxlap-dedicated-case-V1.21.zip\">Download STL Model V1.21<\/a><\/div>\n<\/div>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\">1.2 \u2013 Get required parts<\/h3>\n\n\n\n<p>The board is coming with the display. The firmware is also alreday on it &#8211; no need to flash the board.<\/p>\n\n\n\n<div data-block-name=\"woocommerce\/single-product\" data-product-id=\"795\" data-wp-context=\"{&quot;productId&quot;:795,&quot;variationId&quot;:null}\" data-wp-interactive=\"woocommerce\/single-product\" class=\"wp-block-woocommerce-single-product woocommerce\">\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div data-block-name=\"woocommerce\/product-image\" data-is-descendent-of-single-product-block=\"true\" data-show-sale-badge=\"false\" class=\"wc-block-components-product-image wc-block-grid__product-image wc-block-components-product-image--aspect-ratio-auto wp-block-woocommerce-product-image\"><a href=\"https:\/\/foxlap.com\/tutorials\/product\/foxlap-dedicated-board-pack\/\" style=\"\" data-wp-on--click=\"woocommerce\/product-collection::actions.viewProduct\"><img decoding=\"async\" width=\"600\" height=\"337\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-600x337.jpg\" class=\"attachment-woocommerce_single size-woocommerce_single\" alt=\"FoxLAP V1 - Dedicated board pack\" data-testid=\"product-image\" data-image-id=\"1209\" style=\"object-fit:cover;\" loading=\"lazy\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-600x337.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-300x168.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-768x431.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1.jpg 1007w\" sizes=\"auto, (max-width: 600px) 100vw, 600px\" \/><div class=\"wc-block-components-product-image__inner-container\"><\/div><\/a><\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><h2 class=\"wp-block-post-title\"><a href=\"https:\/\/foxlap.com\/tutorials\/product\/foxlap-dedicated-board-pack\/\" target=\"_self\" >FoxLAP V1 &#8211; Dedicated board pack<\/a><\/h2>\n\n\n\n<div data-block-name=\"woocommerce\/product-price\" data-is-descendent-of-single-product-block=\"true\" class=\"wp-block-woocommerce-product-price\" data-wp-interactive=\"woocommerce\/product-elements\" data-wp-context='{\"productElementKey\":\"price_html\"}'><div class=\"wc-block-components-product-price wc-block-grid__product-price\" data-wp-watch=\"callbacks.updateValue\" aria-live=\"polite\" aria-atomic=\"true\">\n\t\t\t\t\t<span class=\"woocommerce-Price-amount amount\" aria-hidden=\"true\"><bdi>149,00&nbsp;<span class=\"woocommerce-Price-currencySymbol\">&euro;<\/span><\/bdi><\/span> <span aria-hidden=\"true\">&ndash;<\/span> <span class=\"woocommerce-Price-amount amount\" aria-hidden=\"true\"><bdi>249,00&nbsp;<span class=\"woocommerce-Price-currencySymbol\">&euro;<\/span><\/bdi><\/span><span class=\"screen-reader-text\">Price range: 149,00&nbsp;&euro; through 249,00&nbsp;&euro;<\/span>\n\t\t\t\t<\/div><\/div>\n\n<div class=\"wp-block-post-excerpt\"><p class=\"wp-block-post-excerpt__excerpt\">FoxLAP &#8211; Dedicated board pack include: PCB including display &amp; RPM Sensor, Overlay with switch buttons, RPM cable, Water temperature probe, M8 Cable with temperature connectors, RPM Sensor included on the main board, M8 connector, 4GB SDCARD, JST 4 pins (for the external GNSS), JST 2pins (for the battery), Screws, More info <\/p><\/div>\n\n<div data-block-name=\"woocommerce\/add-to-cart-form\" class=\"wp-block-add-to-cart-form wc-block-add-to-cart-form wc-block-add-to-cart-form--input wp-block-woocommerce-add-to-cart-form\" >\n<form class=\"variations_form cart\" action=\"https:\/\/foxlap.com\/tutorials\/product\/foxlap-dedicated-board-pack\/\" method=\"post\" enctype='multipart\/form-data' data-product_id=\"795\" data-product_variations=\"[{&quot;attributes&quot;:{&quot;attribute_options&quot;:&quot;Minimal&quot;},&quot;availability_html&quot;:&quot;&lt;p class=\\&quot;stock out-of-stock\\&quot;&gt;Out of stock&lt;\\\/p&gt;\\n&quot;,&quot;backorders_allowed&quot;:false,&quot;dimensions&quot;:{&quot;length&quot;:&quot;15&quot;,&quot;width&quot;:&quot;15&quot;,&quot;height&quot;:&quot;6&quot;},&quot;dimensions_html&quot;:&quot;15 &amp;times; 15 &amp;times; 6 cm&quot;,&quot;display_price&quot;:149,&quot;display_regular_price&quot;:159,&quot;image&quot;:{&quot;title&quot;:&quot;&quot;,&quot;caption&quot;:&quot;&quot;,&quot;url&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;alt&quot;:&quot;&quot;,&quot;src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg&quot;,&quot;srcset&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg 600w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x168.jpg 300w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-768x431.jpg 768w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg 1007w&quot;,&quot;sizes&quot;:&quot;(max-width: 600px) 100vw, 600px&quot;,&quot;full_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;full_src_w&quot;:1007,&quot;full_src_h&quot;:565,&quot;gallery_thumbnail_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-100x100.jpg&quot;,&quot;gallery_thumbnail_src_w&quot;:100,&quot;gallery_thumbnail_src_h&quot;:100,&quot;thumb_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x300.jpg&quot;,&quot;thumb_src_w&quot;:300,&quot;thumb_src_h&quot;:300,&quot;src_w&quot;:600,&quot;src_h&quot;:337},&quot;image_id&quot;:1209,&quot;is_downloadable&quot;:false,&quot;is_in_stock&quot;:false,&quot;is_purchasable&quot;:true,&quot;is_sold_individually&quot;:&quot;no&quot;,&quot;is_virtual&quot;:false,&quot;max_qty&quot;:&quot;&quot;,&quot;min_qty&quot;:1,&quot;price_html&quot;:&quot;&lt;span class=\\&quot;price\\&quot;&gt;&lt;del aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;159,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/del&gt; &lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Original price was: 159,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;ins aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;149,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/ins&gt;&lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Current price is: 149,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;\\\/span&gt;&quot;,&quot;sku&quot;:&quot;FOXLAP_1302&quot;,&quot;variation_description&quot;:&quot;&lt;p&gt;Dedicated board pack&lt;\\\/p&gt;\\n&quot;,&quot;variation_id&quot;:1178,&quot;variation_is_active&quot;:true,&quot;variation_is_visible&quot;:true,&quot;weight&quot;:&quot;0.3&quot;,&quot;weight_html&quot;:&quot;0,3 kg&quot;,&quot;wc_amazon_product_type&quot;:&quot;PayAndShip&quot;},{&quot;attributes&quot;:{&quot;attribute_options&quot;:&quot;With High quality 3D printed plastic case&quot;},&quot;availability_html&quot;:&quot;&lt;p class=\\&quot;stock out-of-stock\\&quot;&gt;Out of stock&lt;\\\/p&gt;\\n&quot;,&quot;backorders_allowed&quot;:false,&quot;dimensions&quot;:{&quot;length&quot;:&quot;15&quot;,&quot;width&quot;:&quot;15&quot;,&quot;height&quot;:&quot;6&quot;},&quot;dimensions_html&quot;:&quot;15 &amp;times; 15 &amp;times; 6 cm&quot;,&quot;display_price&quot;:169,&quot;display_regular_price&quot;:189,&quot;image&quot;:{&quot;title&quot;:&quot;&quot;,&quot;caption&quot;:&quot;&quot;,&quot;url&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;alt&quot;:&quot;&quot;,&quot;src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg&quot;,&quot;srcset&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg 600w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x168.jpg 300w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-768x431.jpg 768w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg 1007w&quot;,&quot;sizes&quot;:&quot;(max-width: 600px) 100vw, 600px&quot;,&quot;full_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;full_src_w&quot;:1007,&quot;full_src_h&quot;:565,&quot;gallery_thumbnail_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-100x100.jpg&quot;,&quot;gallery_thumbnail_src_w&quot;:100,&quot;gallery_thumbnail_src_h&quot;:100,&quot;thumb_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x300.jpg&quot;,&quot;thumb_src_w&quot;:300,&quot;thumb_src_h&quot;:300,&quot;src_w&quot;:600,&quot;src_h&quot;:337},&quot;image_id&quot;:1209,&quot;is_downloadable&quot;:false,&quot;is_in_stock&quot;:false,&quot;is_purchasable&quot;:true,&quot;is_sold_individually&quot;:&quot;no&quot;,&quot;is_virtual&quot;:false,&quot;max_qty&quot;:&quot;&quot;,&quot;min_qty&quot;:1,&quot;price_html&quot;:&quot;&lt;span class=\\&quot;price\\&quot;&gt;&lt;del aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;189,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/del&gt; &lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Original price was: 189,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;ins aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;169,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/ins&gt;&lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Current price is: 169,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;\\\/span&gt;&quot;,&quot;sku&quot;:&quot;FOXLAP_1302&quot;,&quot;variation_description&quot;:&quot;&lt;p&gt;Dedicated board pack + High quality 3D printed plastic case&lt;\\\/p&gt;\\n&quot;,&quot;variation_id&quot;:1176,&quot;variation_is_active&quot;:true,&quot;variation_is_visible&quot;:true,&quot;weight&quot;:&quot;0.3&quot;,&quot;weight_html&quot;:&quot;0,3 kg&quot;,&quot;wc_amazon_product_type&quot;:&quot;PayAndShip&quot;},{&quot;attributes&quot;:{&quot;attribute_options&quot;:&quot;Fully assembled&quot;},&quot;availability_html&quot;:&quot;&lt;p class=\\&quot;stock out-of-stock\\&quot;&gt;Out of stock&lt;\\\/p&gt;\\n&quot;,&quot;backorders_allowed&quot;:false,&quot;dimensions&quot;:{&quot;length&quot;:&quot;15&quot;,&quot;width&quot;:&quot;15&quot;,&quot;height&quot;:&quot;6&quot;},&quot;dimensions_html&quot;:&quot;15 &amp;times; 15 &amp;times; 6 cm&quot;,&quot;display_price&quot;:249,&quot;display_regular_price&quot;:299,&quot;image&quot;:{&quot;title&quot;:&quot;&quot;,&quot;caption&quot;:&quot;&quot;,&quot;url&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;alt&quot;:&quot;&quot;,&quot;src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg&quot;,&quot;srcset&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-600x337.jpg 600w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x168.jpg 300w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-768x431.jpg 768w, https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg 1007w&quot;,&quot;sizes&quot;:&quot;(max-width: 600px) 100vw, 600px&quot;,&quot;full_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1.jpg&quot;,&quot;full_src_w&quot;:1007,&quot;full_src_h&quot;:565,&quot;gallery_thumbnail_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-100x100.jpg&quot;,&quot;gallery_thumbnail_src_w&quot;:100,&quot;gallery_thumbnail_src_h&quot;:100,&quot;thumb_src&quot;:&quot;https:\\\/\\\/foxlap.com\\\/tutorials\\\/wp-content\\\/uploads\\\/2024\\\/12\\\/build-board-09-1-300x300.jpg&quot;,&quot;thumb_src_w&quot;:300,&quot;thumb_src_h&quot;:300,&quot;src_w&quot;:600,&quot;src_h&quot;:337},&quot;image_id&quot;:1209,&quot;is_downloadable&quot;:false,&quot;is_in_stock&quot;:false,&quot;is_purchasable&quot;:true,&quot;is_sold_individually&quot;:&quot;no&quot;,&quot;is_virtual&quot;:false,&quot;max_qty&quot;:&quot;&quot;,&quot;min_qty&quot;:1,&quot;price_html&quot;:&quot;&lt;span class=\\&quot;price\\&quot;&gt;&lt;del aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;299,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/del&gt; &lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Original price was: 299,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;ins aria-hidden=\\&quot;true\\&quot;&gt;&lt;span class=\\&quot;woocommerce-Price-amount amount\\&quot;&gt;&lt;bdi&gt;249,00&amp;nbsp;&lt;span class=\\&quot;woocommerce-Price-currencySymbol\\&quot;&gt;&amp;euro;&lt;\\\/span&gt;&lt;\\\/bdi&gt;&lt;\\\/span&gt;&lt;\\\/ins&gt;&lt;span class=\\&quot;screen-reader-text\\&quot;&gt;Current price is: 249,00&amp;nbsp;&amp;euro;.&lt;\\\/span&gt;&lt;\\\/span&gt;&quot;,&quot;sku&quot;:&quot;FOXLAP_1302&quot;,&quot;variation_description&quot;:&quot;&lt;p&gt;Fully assembled: Dedicated board pack + High quality 3D printed plastic case + GNSS (Ublox M10 gps receiver) + battery.&lt;br \\\/&gt;\\nComplete and ready to drive option&lt;\\\/p&gt;\\n&quot;,&quot;variation_id&quot;:1177,&quot;variation_is_active&quot;:true,&quot;variation_is_visible&quot;:true,&quot;weight&quot;:&quot;0.3&quot;,&quot;weight_html&quot;:&quot;0,3 kg&quot;,&quot;wc_amazon_product_type&quot;:&quot;PayAndShip&quot;}]\">\n\t\n\t\t\t<table class=\"variations\" cellspacing=\"0\" role=\"presentation\">\n\t\t\t<tbody>\n\t\t\t\t\t\t\t\t\t<tr>\n\t\t\t\t\t\t<th class=\"label\"><label for=\"options\">options<\/label><\/th>\n\t\t\t\t\t\t<td class=\"value\">\n\t\t\t\t\t\t\t<select id=\"options\" class=\"\" name=\"attribute_options\" data-attribute_name=\"attribute_options\" data-show_option_none=\"yes\"><option value=\"\">Choose an option<\/option><option value=\"Minimal\" >Minimal<\/option><option value=\"With High quality 3D printed plastic case\" >With High quality 3D printed plastic case<\/option><option value=\"Fully assembled\" >Fully assembled<\/option><\/select><a class=\"reset_variations\" href=\"#\" aria-label=\"Clear options\">Clear<\/a>\t\t\t\t\t\t<\/td>\n\t\t\t\t\t<\/tr>\n\t\t\t\t\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t<div class=\"reset_variations_alert screen-reader-text\" role=\"alert\" aria-live=\"polite\" aria-relevant=\"all\"><\/div>\n\t\t\n\t\t<div class=\"single_variation_wrap\">\n\t\t\t<div class=\"woocommerce-variation single_variation\" role=\"alert\" aria-relevant=\"additions\"><\/div><div class=\"woocommerce-variation-add-to-cart variations_button\">\n\t\n\t<div class=\"quantity\">\n\t\t<label class=\"screen-reader-text\" for=\"quantity_69d8fba3a53a4\">FoxLAP V1 &#8211; Dedicated board pack quantity<\/label>\n\t<input\n\t\ttype=\"number\"\n\t\t\t\tid=\"quantity_69d8fba3a53a4\"\n\t\tclass=\"input-text qty text\"\n\t\tname=\"quantity\"\n\t\tvalue=\"1\"\n\t\taria-label=\"Product quantity\"\n\t\t\t\tmin=\"1\"\n\t\t\t\t\t\t\tstep=\"1\"\n\t\t\tplaceholder=\"\"\n\t\t\tinputmode=\"numeric\"\n\t\t\tautocomplete=\"off\"\n\t\t\t\/>\n\t<\/div>\n\n\t<button type=\"submit\" class=\"single_add_to_cart_button button alt\">Add to cart<\/button>\n\n\t\n\t<input type=\"hidden\" name=\"add-to-cart\" value=\"795\" \/>\n\t<input type=\"hidden\" name=\"product_id\" value=\"795\" \/>\n\t<input type=\"hidden\" name=\"variation_id\" class=\"variation_id\" value=\"0\" \/>\n<\/div>\n\t\t<\/div>\n\t\n\t<\/form>\n\n<\/div>\n\n\n<div data-block-name=\"woocommerce\/product-meta\" class=\"wp-block-woocommerce-product-meta\">\n<div class=\"wp-block-group is-nowrap is-layout-flex wp-container-core-group-is-layout-6c531013 wp-block-group-is-layout-flex\"><div data-block-name=\"woocommerce\/product-sku\" class=\"wc-block-components-product-sku wc-block-grid__product-sku wp-block-woocommerce-product-sku product_meta wp-block-post-terms \" style=\"\">\n\t\t\t\t<span class=\"wp-block-post-terms__prefix\">SKU:<\/span>\n\t\t\t\t<span class=\"sku\" data-wp-interactive=\"woocommerce\/product-elements\" data-wp-text=\"state.productData.sku\"><\/span>\n\t\t\t\t\n\t\t\t<\/div>\n\n<div class=\"taxonomy-product_cat wp-block-post-terms\"><span class=\"wp-block-post-terms__prefix\">Category: <\/span><a href=\"https:\/\/foxlap.com\/tutorials\/product-category\/dedicated-board\/\" rel=\"tag\">Dedicated board<\/a><span class=\"wp-block-post-terms__separator\">, <\/span><a href=\"https:\/\/foxlap.com\/tutorials\/product-category\/foxlap\/\" rel=\"tag\">FoxLAP<\/a><\/div>\n\n<div class=\"taxonomy-product_tag wp-block-post-terms\"><span class=\"wp-block-post-terms__prefix\">Tags: <\/span><a href=\"https:\/\/foxlap.com\/tutorials\/product-tag\/foxlap\/\" rel=\"tag\">FoxLAP<\/a><span class=\"wp-block-post-terms__separator\">, <\/span><a href=\"https:\/\/foxlap.com\/tutorials\/product-tag\/gps\/\" rel=\"tag\">GPS<\/a><span class=\"wp-block-post-terms__separator\">, <\/span><a href=\"https:\/\/foxlap.com\/tutorials\/product-tag\/lap-timer\/\" rel=\"tag\">LAP timer<\/a><\/div><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751-1024x578.jpg\" alt=\"\" class=\"wp-image-669\" style=\"object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/IMG20241230183751.jpg 1156w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1007\" height=\"565\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1.jpg\" alt=\"\" class=\"wp-image-1209\" style=\"object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1.jpg 1007w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-300x168.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-768x431.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-09-1-600x337.jpg 600w\" sizes=\"auto, (max-width: 1007px) 100vw, 1007px\" \/><\/figure>\n<\/div>\n<\/div>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1156\" height=\"652\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content.jpg\" alt=\"\" class=\"wp-image-1211\" style=\"object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content.jpg 1156w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board-content-600x338.jpg 600w\" sizes=\"auto, (max-width: 1156px) 100vw, 1156px\" \/><\/figure>\n\n\n\n<p>I made a package including what you will need. The <strong>FoxLAP dedicated pack<\/strong> includes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>1 FoxLAP dedicated PCB board (display included &amp; RPM Sensor).<\/li>\n\n\n\n<li>1 adhesive overlay layer with push buttons<\/li>\n\n\n\n<li>1 M8 connector (will be mounted at the bottom of the FoxLAP device) with JST connector for external sensors<\/li>\n\n\n\n<li>JST 4 pins (for the external GNSS) <\/li>\n\n\n\n<li>JST 2pins (for the battery) <\/li>\n\n\n\n<li>Water temperature probe <\/li>\n\n\n\n<li>RPM Sensor (included on the main board)<\/li>\n\n\n\n<li>RPM cable <\/li>\n\n\n\n<li>4GB SDCARD<\/li>\n\n\n\n<li>M8 Cable with temperature connectors <\/li>\n\n\n\n<li>Screws<\/li>\n<\/ul>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1920\" height=\"938\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap.jpg\" alt=\"\" class=\"wp-image-1271\" style=\"object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap.jpg 1920w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap-300x147.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap-1024x500.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap-768x375.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap-1536x750.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/board_foxlap-600x293.jpg 600w\" sizes=\"auto, (max-width: 1920px) 100vw, 1920px\" \/><\/figure>\n\n\n\n<p>All the boards are fully tested before expedition.<\/p>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">2. Assembly guide<\/mark><\/h3>\n\n\n\n<p><\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01.jpg\" alt=\"\" class=\"wp-image-694\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><strong>1-<\/strong><\/mark> You must have printed the box enclosure &#8211; top and bottom part. (this is not the same model as the DIY version)<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/02.jpg\" alt=\"\" class=\"wp-image-843\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/02.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/02-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/02-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/02-600x339.jpg 600w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><strong>2-<\/strong><\/mark> Inspect your print and make sure there are no defects. test the holes for the screws. You can enlarge the holes in the upper part of the box to make sure the screws fit properly.<\/p>\n<\/div>\n<\/div>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/03.jpg\" alt=\"\" class=\"wp-image-696\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/03.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/03-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/03-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/03-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><strong>3-<\/strong><\/mark> Place the M8 30mm screw add regular glue at the top of the screw, then screw it.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/04.jpg\" alt=\"\" class=\"wp-image-697\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/04.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/04-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/04-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/04-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><strong>4-<\/strong><\/mark> Insert Hot glue inside remaining space where the M8 head is inserted (it&#8217;s very important to solidify this part, hot glue is mandatory)<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/05.jpg\" alt=\"\" class=\"wp-image-698\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/05.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/05-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/05-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/05-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p>You must have this. Now test your case assembly and try to screw in the M3 9mm. You need to be sure that the assembly of the box is correct and that you can close the box. once everything is ok you can continue.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/06-1-1.jpg\" alt=\"\" class=\"wp-image-701\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/06-1-1.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/06-1-1-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/06-1-1-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/06-1-1-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">5-<\/mark><\/strong> Take the PCB and add insulation paste to the bottom of the USB connector (be careful not to get this paste inside the connector)<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"1156\" height=\"627\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01.jpg\" alt=\"\" class=\"wp-image-1198\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01.jpg 1156w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01-300x163.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01-1024x555.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01-768x417.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-01-600x325.jpg 600w\" sizes=\"auto, (max-width: 1156px) 100vw, 1156px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">6-<\/mark><\/strong> Put the PCB in the upper part of the box. You will have to start from the USB connector side.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"1156\" height=\"652\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02.jpg\" alt=\"\" class=\"wp-image-1199\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02.jpg 1156w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-02-600x338.jpg 600w\" sizes=\"auto, (max-width: 1156px) 100vw, 1156px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">7-<\/mark><\/strong> Secure the PCB with 4 M2 4mm screws<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/09.jpg\" alt=\"\" class=\"wp-image-704\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/09.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/09-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/09-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/09-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><strong>8-<\/strong><\/mark> Flip it over. The PCB must be securely attached and must not move. don&#8217;t go pushing on it like crazy just to see if you can break the support. Of course you are capable. It just has to stand up to something reasonable.<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/10.jpg\" alt=\"\" class=\"wp-image-707\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/10.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/10-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/10-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/10-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">9-<\/mark><\/strong> Grab the overlay layer. Make sure your hands are washed and <mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">don&#8217;t put your fingers on the display or on the screen of the overlay <\/mark><\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/12.jpg\" alt=\"\" class=\"wp-image-708\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/12.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/12-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/12-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/12-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">10-<\/mark><\/strong> Add regular glue all around the screen. a thin layer only to fill in the irregularities of the 3D printing. Do not overflow onto the screen. otherwise it will be ugly.<\/p>\n<\/div>\n<\/div>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224615.jpg\" alt=\"\" class=\"wp-image-709\" style=\"aspect-ratio:16\/9;object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224615.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224615-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224615-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224615-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-1024x578.jpg\" alt=\"\" class=\"wp-image-710\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-scaled-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-1536x866.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/11-2048x1155.jpg 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">11-<\/mark><\/strong> It\u2019s time to be delicate. remove the protective film from the display. <mark style=\"background-color:rgba(0, 0, 0, 0);color:#f70000\" class=\"has-inline-color\">I said keep your fingers off!<\/mark><\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/13.jpg\" alt=\"\" class=\"wp-image-711\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/13.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/13-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/13-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/13-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">12-<\/mark><\/strong> remove the protective film from the adhesive side of the overlay and also remove the protective film from the transparent part. <mark style=\"background-color:rgba(0, 0, 0, 0);color:#f70000\" class=\"has-inline-color\">Did I already say don\u2019t stick your fingers in?<\/mark><\/p>\n<\/div>\n<\/div>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/14.jpg\" alt=\"\" class=\"wp-image-712\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/14.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/14-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/14-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/14-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">13-<\/mark><\/strong> insert the tail of the overlay in the hole (please no jokes). and stick the overlay on the box. make movements with your fingers to ensure perfect adhesion and adjust the positioning<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224900.jpg\" alt=\"\" class=\"wp-image-713\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224900.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224900-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224900-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102224900-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p>I generally place my Bible on top to let it dry for about 20 to 30 minutes. Oh no! not this bible, but the c\/c++ programmer&#8217;s bible. the one that weighs 3 kilos. And yes I&#8217;m old, i learned with books in the 90s. High five if you&#8217;re old too ! <\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103015120.jpg\" alt=\"\" class=\"wp-image-714\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103015120.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103015120-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103015120-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103015120-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/finish.jpg\" alt=\"\" class=\"wp-image-715\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/finish.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/finish-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/finish-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/finish-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"1156\" height=\"652\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03.jpg\" alt=\"\" class=\"wp-image-1200\" style=\"width:812px;height:auto\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03.jpg 1156w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-03-600x338.jpg 600w\" sizes=\"auto, (max-width: 1156px) 100vw, 1156px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">14-<\/mark><\/strong> insert the overlay tail into the connector. can be hard, use this kind of tools to insert the tail<\/p>\n\n\n\n<p>Well done, the upper part is finished. And all this without any soledring\u2026 too easy. But wait a little, maybe we&#8217;ll do some later\u2026 Soldering is something for the real men. and we&#8217;re real men, right?<\/p>\n\n\n\n<p>There is still a protective film on the display. You will remove it only at the end &#8211; YOU WILL SEE THIS AS A REWARD FOR THE GOOD WORK CARRIED OUT.<\/p>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">15-<\/mark><\/strong> Take now your 18650 battery. Use a spot welder to add Nickel strips to your 18650 battery. solder the cables (JST 2 pins cable). red for positive and black for GND obviously. <\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"345\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-1024x345.jpg\" alt=\"\" class=\"wp-image-433\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-1024x345.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-600x202.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-300x101.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-768x259.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare-1536x518.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/02\/battery-prepare.jpg 1921w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-bottom.jpg\" alt=\"\" class=\"wp-image-716\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-bottom.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-bottom-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-bottom-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/01-bottom-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">16-<\/mark><\/strong> place your battery into the bottom part of the box. make sure to let enough length for the cable<\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-1024x578.jpg\" alt=\"\" class=\"wp-image-717\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-scaled-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-1536x866.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/02-bottom-2048x1155.jpg 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">17-<\/mark><\/strong> add hot glue to make sure it don&#8217;t move. <\/p>\n<\/div>\n<\/div>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\"><\/mark><\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230603.jpg\" alt=\"\" class=\"wp-image-718\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230603.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230603-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230603-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230603-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">18-<\/mark><\/strong> insert the M8 connector. <\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230644.jpg\" alt=\"\" class=\"wp-image-719\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230644.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230644-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230644-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230644-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">19-<\/mark><\/strong> You may need to use a tool, depending on the print qualty, i t can be hard to make the first loop<\/p>\n<\/div>\n<\/div>\n\n\n\n<p><strong>TIP: <\/strong>Backfill the M8 connector cavity with hot glue to stiffen this area and add strain relief\u2014especially for <strong>PLA<\/strong> prints. An M8 cable plugs in here, and a hard yank (shock, crash) could otherwise rip the connector out and damage the case. <strong>PETG-CF cases typically don\u2019t need hot glue<\/strong>.<\/p>\n\n\n\n<figure class=\"wp-block-image is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"959\" height=\"488\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/connector2.png\" alt=\"\" class=\"wp-image-639\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/connector2.png 959w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/connector2-600x305.png 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/connector2-300x153.png 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/connector2-768x391.png 768w\" sizes=\"auto, (max-width: 959px) 100vw, 959px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230752.jpg\" alt=\"\" class=\"wp-image-723\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230752.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230752-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230752-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250102230752-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<p><\/p>\n\n\n\n<figure class=\"wp-block-pullquote\"><blockquote><p>This dedicated board can host a GNSS receiver. You can order it with a pre-installed u-blox M10 chip and antenna (on request). In this guide, however, we\u2019ll use the MatekSys M10Q module &#8211; the same one used in the DIY version.<\/p><\/blockquote><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"1156\" height=\"652\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1.jpg\" alt=\"\" class=\"wp-image-1203\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1.jpg 1156w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-04-1-600x338.jpg 600w\" sizes=\"auto, (max-width: 1156px) 100vw, 1156px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">20- <\/mark><\/strong>Take your GNSS module and the JST 4 pins cable. Plug the JST into the board and solder the cables <strong><mark style=\"background-color:rgba(0, 0, 0, 0);color:#cf2e2e\" class=\"has-inline-color\">3V<\/mark><\/strong>, GND, RX, TX to your module. once it is done, unplug the JST<br><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">IMPORTANT:<\/mark> RX on the board goes to RX on the GNSS module<\/strong>. <strong>And TX to TX<\/strong>. The dedicated board (since version 3.4) power the external GNSS module with 3V.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05-1024x578.jpg\" alt=\"\" class=\"wp-image-1202\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-05.jpg 1156w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">21-<\/mark><\/strong> place the GNSS module into the place holder and add hot glue to keep it in place.<br><\/p>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">22-<\/mark> <\/strong>insert the SDCARD. FAT32 formated. <strong>Don&#8217;t use no name sdcards<\/strong> !<\/p>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Sensors<\/h2>\n\n\n\n<p>This board use an <strong>internal sensor<\/strong> to monitor RPM. You will only have to clip the RPM cable behind the box. On the main board, A metal rod is soldered to the ANT pin (comes already soldered). it will be the antenna to monitor RPM from the cable clipped behind the plastic case enclosure. <br><strong>You will have another option with the <mark style=\"background-color:rgba(0, 0, 0, 0);color:#cf2e2e\" class=\"has-inline-color\">RPM.EXT.SENSOR<\/mark> JST connector to use an external RPM circuit (3V, GND, RPM signal)<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08-1024x578.jpg\" alt=\"\" class=\"wp-image-1206\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-08.jpg 1156w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug-1024x578.jpg\" alt=\"\" class=\"wp-image-1185\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/rpm-plug.jpg 1156w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>From the M8 connector, connect the cables as follow:<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>BLUE -&gt; 3V3 (JST 4 pins)<\/li>\n\n\n\n<li>BROWN -&gt; TEMP (JST 4 pins)<\/li>\n\n\n\n<li>White -&gt; TC- (JST 4 pins) (exhaut gaz temp)<\/li>\n\n\n\n<li>BLACK -&gt; TC+ (JST 4 pins) (exhaut gaz temp)<\/li>\n<\/ul>\n\n\n\n<p><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"593\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06-1024x593.jpg\" alt=\"\" class=\"wp-image-1204\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06-1024x593.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06-300x174.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06-768x445.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06-600x348.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-06.jpg 1125w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<div style=\"height:30px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<p><strong>This dedicated board comes with his own cable allowing to plug an exhaust gaz probe and the water temperature probe. This cable goes to the M8 connector.<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"578\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07-1024x578.jpg\" alt=\"\" class=\"wp-image-1205\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07-1024x578.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07-768x433.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07-600x338.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/build-board-07.jpg 1156w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-2-color\">24-<\/mark><\/strong> It&#8217;s time to close the box<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" width=\"810\" height=\"457\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103002404.jpg\" alt=\"\" class=\"wp-image-724\" style=\"width:800px\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103002404.jpg 810w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103002404-600x339.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103002404-300x169.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/IMG20250103002404-768x433.jpg 768w\" sizes=\"auto, (max-width: 810px) 100vw, 810px\" \/><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">3- First launch and configuration<\/mark><\/h3>\n\n\n\n<p>On the first launch, you must get this screen. If it is not already done,&nbsp;<a href=\"https:\/\/foxlap.com\/register.php\">create a FoxLAP account here<\/a><\/p>\n\n\n\n<figure class=\"wp-block-image alignleft size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"340\" height=\"176\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/first-launch.jpg\" alt=\"\" class=\"wp-image-734\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/first-launch.jpg 340w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2025\/01\/first-launch-300x155.jpg 300w\" sizes=\"auto, (max-width: 340px) 100vw, 340px\" \/><\/figure>\n\n\n\n<p><br>You need to enter your name, select a password, etc. Some characters are not allowed, so be careful. You\u2019ll need to enter this information into the device, and screen space is limited, so I had to make choices about which characters were allowed or not.<\/p>\n\n\n\n<p>Only these characters are allowed at this time:&nbsp;<mark>0-9, a-z, A-Z, ! # $ % &amp; \u2018 ( ) * + , \u2013 . @ : ; =<\/mark><\/p>\n\n\n\n<p>What you will need to enter on first launch is shown in this video. The device will must be able to connect to the internet, that\u2019s why you will have to enter Wifi credentials. You can have some issues with passwords containing special characters not supported by the device, in that case, you can share your connection via your mobile creating a hotspot with a password containing characters supported by the device.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"FoxLAP - First Launch\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/bhl_U4WhiV8?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p><mark>If the connection is unsuccessfull, shutdown the device and restart to retry<\/mark><\/p>\n\n\n\n<p>Once the connection is successfull, the device will retrieve the settings stored on your account available at that page&nbsp;<a href=\"https:\/\/foxlap.com\/mydevice.php\" target=\"_blank\" rel=\"noreferrer noopener\">https:\/\/foxlap.com\/mydevice.php<\/a><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"521\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-1024x521.jpg\" alt=\"\" class=\"wp-image-490\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-1024x521.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-600x305.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-300x153.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-768x391.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings-1536x782.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/trackssettings.jpg 1872w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p>You will be able to change settings and also select\/unselect available tracks on your device.&nbsp;<strong>Don\u2019t select all tracks<\/strong>. Only select tracks from your country or the ones you will use. The more you select tracks, longer will be track detection. don\u2019t forget to click on \u201c<strong>Save Track selection<\/strong>\u201d when you change selection.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"461\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-1024x461.jpg\" alt=\"\" class=\"wp-image-491\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-1024x461.jpg 1024w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-scaled-600x270.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-300x135.jpg 300w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-768x345.jpg 768w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-1536x691.jpg 1536w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/04\/IMG20240403192134-2048x921.jpg 2048w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p>And, on the device, go to the \u201c<strong>Synchronize<\/strong>\u201d icon, then click on \u201c<strong>Update track databse<\/strong>\u201c.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What to do if your track is not available on the device<\/strong>?<\/h3>\n\n\n\n<p>I recommand to create your own track using the provided tool available here http<a href=\"https:\/\/foxlap.com\/track_creation.php\" target=\"_blank\" rel=\"noreferrer noopener\">s:\/\/foxlap.com\/track_creation.php<\/a><\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"track creation\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/yb-_YDaLdlY?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p>Once the track is created, go to&nbsp;<a href=\"https:\/\/foxlap.com\/mydevice.php\" target=\"_blank\" rel=\"noreferrer noopener\">https:\/\/foxlap.com\/mydevice.php<\/a>&nbsp;then select your newly created track in \u201cMy own tracks\u201d category, then \u201cSave selection\u201d.<br>And also on the device: go to the \u201c<strong>Synchronize<\/strong>\u201d icon, then click on \u201c<strong>Update track databse<\/strong>\u201c.<\/p>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">4. Setup<\/mark> (using the RPM &#8220;internal sensor&#8221;)<\/h3>\n\n\n\n<p>Here you can see how to setup the foxlap device based on the dedicated baord with the internal RPM sensor. This will allow you get RPM (cable clip behind the box), water temperature and exhaust gaz temperature<\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"652\" height=\"1006\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/1-install-water-sensor.jpg\" alt=\"\" class=\"wp-image-686\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/1-install-water-sensor.jpg 652w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/1-install-water-sensor-600x926.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/1-install-water-sensor-194x300.jpg 194w\" sizes=\"auto, (max-width: 652px) 100vw, 652px\" \/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-1-color\">1- Install the water temperature probe.<\/mark><\/strong><\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"652\" height=\"927\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/2-install-cable.jpg\" alt=\"\" class=\"wp-image-687\" style=\"object-fit:cover\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/2-install-cable.jpg 652w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/2-install-cable-600x853.jpg 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/2-install-cable-211x300.jpg 211w\" sizes=\"auto, (max-width: 652px) 100vw, 652px\" \/><\/figure>\n\n\n\n<p><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-1-color\"><strong>2- install the cable with the K-type connector for the exhaust gaz and the connector for the water temperature probe.<\/strong><\/mark> <strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-1-color\">Use zip ties to fix it on your gokart<\/mark><\/strong>.<\/p>\n<\/div>\n<\/div>\n\n\n\n<p><br><\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/3-plug-cable-1.jpg\" alt=\"\" class=\"wp-image-689\" style=\"object-fit:cover\"\/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-1-color\">3- plug the water temperature probe<\/mark><\/strong><\/p>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\">\n<figure class=\"wp-block-image size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/4-install-rpm-cable.jpg\" alt=\"\" class=\"wp-image-690\" style=\"object-fit:cover;width:512px;height:auto\"\/><\/figure>\n\n\n\n<p><strong>4- Install the RPM cable.<\/strong> The number of turns depends on the engine. Rotax engines typically need <strong>2\u20134 turns<\/strong> -Don\u2019t start with 20 &#8211; Begin with <strong>3 turns<\/strong> and check whether the RPM reads correctly; then add <strong>one turn at a time<\/strong> until the signal is stable. <strong>Four-stroke<\/strong> engines usually need more turns.<\/p>\n<\/div>\n<\/div>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/12\/5-install-foxlap.jpg\" alt=\"\" class=\"wp-image-691\" style=\"object-fit:cover\"\/><\/figure>\n\n\n\n<p><strong><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-nv-c-1-color\">5- plug the external sensor cable to the fox lap device and clip the rpm cable in the housing provided at the back of the case <\/mark><\/strong><\/p>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0);color:#fd7c23\" class=\"has-inline-color\"><strong>dedicated board Firmware<\/strong><\/mark><\/h3>\n\n\n\n<p><strong><mark>Version 2.03 \u2013 release date 2026\/03\/<\/mark>25<\/strong><br>What\u2019s new in version 2.0X:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Faster GUI with hardware SPI<\/li>\n\n\n\n<li>Various bug fixes<\/li>\n<\/ul>\n\n\n\n<p><\/p>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/foxlap.com\/dl\/foxlap-PCB-v2.03.zip\">Download FoxLAP Firmware PCB V2.03<\/a><\/div>\n<\/div>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h4 class=\"wp-block-heading\"><mark>Install a new firmware on an exising and running device<\/mark><\/h4>\n\n\n\n<p>Start your foxlap device. then select the menu \u201c<strong>WiFi transfer<\/strong>\u201d then \u201c<strong>Start WiFi<\/strong>\u201c. If you did not set a wifi password, do it on the device by selecting \u201c<strong>WiFi transfer<\/strong>\u201d -&gt; \u201c<strong>Set wifi password<\/strong>\u201d (your password must be 8 characters length minimum.<br><br>Once it is done and your device is running in Wifi mode, you must see \u201cWifi Data Transfer\u201d on the screen with the name of the created hotspot. (FoxLAP_xxxxxx). On your computer, connect the wifi to this hotspot (be careful, passwords are case sensitive)<br><br>Then open the software <strong>GPXRender <\/strong>(available on this website). Click on \u201csynchronize device\u201d. If your are connected to the device, a window will popup. Go to the \u201cFirmware\u201d tab, then select the new firmware file and then click on \u201cFlash\u201d. You are now able to flash device without the need of dismounting it<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"766\" height=\"558\" src=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/06\/gpxrender-flash-firmware.png\" alt=\"\" class=\"wp-image-521\" srcset=\"https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/06\/gpxrender-flash-firmware.png 766w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/06\/gpxrender-flash-firmware-600x437.png 600w, https:\/\/foxlap.com\/tutorials\/wp-content\/uploads\/2024\/06\/gpxrender-flash-firmware-300x219.png 300w\" sizes=\"auto, (max-width: 766px) 100vw, 766px\" \/><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-28f84493 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:33.33%\">\n<figure class=\"wp-block-image size-large is-resized\"><a href=\"https:\/\/foxlap.com\/dl\/foxLAP-UserGuide.pdf\"><img decoding=\"async\" src=\"https:\/\/foxlap.com\/home\/images\/pdf-userguide.png\" alt=\"\" style=\"width:106px;height:auto\"\/><\/a><\/figure>\n<\/div>\n\n\n\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\" style=\"flex-basis:66.66%\">\n<h2 class=\"wp-block-heading\"><strong>Downoad FoxLAP User Guide<\/strong><\/h2>\n\n\n\n<p><a href=\"https:\/\/foxlap.com\/dl\/foxLAP-UserGuide.pdf\">https:\/\/foxlap.com\/dl\/foxLAP-UserGuide.pdf<\/a><\/p>\n<\/div>\n<\/div>\n\n\n\n<h3 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">And now it&#8217;s time to see it in action<\/mark><\/h3>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"FoxLAP - GPS lap timer with external sensors\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/4ZMdIH3qcIM?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<div style=\"height:35px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<p><\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-luminous-vivid-orange-color\">And now in real condition<\/mark><\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Rotax Natio a biganos avec T\u00e9l\u00e9m\u00e9trie. Hot laps\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/UKf8alugTRs?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>The purpose of this post is to present the Pro version of the FoxLAP device, built on its dedicated board. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":673,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[6,1],"tags":[12,13,11],"class_list":["post-666","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-telemetry","category-uncategorized","tag-gokart","tag-gps","tag-lap-timer","desktop-align-left","tablet-align-left","mobile-align-left"],"_links":{"self":[{"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/posts\/666","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/comments?post=666"}],"version-history":[{"count":117,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/posts\/666\/revisions"}],"predecessor-version":[{"id":1388,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/posts\/666\/revisions\/1388"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/media\/673"}],"wp:attachment":[{"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/media?parent=666"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/categories?post=666"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/foxlap.com\/tutorials\/wp-json\/wp\/v2\/tags?post=666"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}